HPE EVA Storage

Trouble Installing Command View 10

 
larsjohansen5
Occasional Advisor

Trouble Installing Command View 10

HI,

 

Im trying to install Command View 10, Right after choosing language(English, which is the only choice btw) it fails with a message telling me to set my language to english and try again, I tried set the Windows language setting in control panel to English, but it still pops up with the same error.


Anyone else seen this?

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Trouble Installing Command View 10

Do you have a "native" english  version of windows?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
larsjohansen5
Occasional Advisor

Re: Trouble Installing Command View 10

Yes I do.

Jan-E
Occasional Visitor

Re: Trouble Installing Command View 10

 

Hi !

I have the same problem. I have check settings in the server and it is English (United Stated) everywhere. So i upgrade only to CVE 9.4 whit out problems.

//Jan-E

Sebastian.Koehler
Honored Contributor

Re: Trouble Installing Command View 10

You need to change the regional settings of the mangement station to format english (US) and location United States. This is required during installation/deinstallation of the product at the moment and hopefully resolved in a future release of Command View. If you're installing on a non-english server, make sure the user you're using during setup is in the local group Administrators. If it does not exists, create it and assign the user to it.

 

Regards,

Sebastian