HPE EVA Storage

View RSS numbers and indexes in Command View

 
SOLVED
Go to solution
Andy Benegas
Advisor

View RSS numbers and indexes in Command View

We have an EVA4000 firmware version 6.100 and we are using Command View v8.00. We are not able to see the RSS numbers and indexes.

I know that we were able to see the RSS numbers and indexes when the EVA4000 was initially installed. I cannot recall the version of the firmware or Command View.

Is this something that has changed recently?
3 REPLIES 3
Uwe Zessin
Honored Contributor

Re: View RSS numbers and indexes in Command View

I still see them in CV 6.0.2, so they must have removed them in 7.0.
.
Mark...
Honored Contributor
Solution

Re: View RSS numbers and indexes in Command View

Hi
Yes, the RSS info was removed from the properties of a Vdisk satrting with CV 7.0.
You can still get the info in a few ways.
One is to use SSSU and you can get the info from there. Just do an "ls disk full" if I remember correctly.
Mark...
if you have nothing useful to say, say nothing...
Andy Benegas
Advisor

Re: View RSS numbers and indexes in Command View

Thanks for the information. I will give SSSU a try.