HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems trying to create boot from SAN Server Profile in OneView

MattGG
Advisor

Problems trying to create boot from SAN Server Profile in OneView

Running OneView 1.20.05 with FlexFarbric 20/40, and 630FLB CNA on BL460c G9s blades.

 

Create new Server Profile and copied the WWPN from the FC Uplink as reported in OneView (included : in the address).  Added the address to the FC Connection in the SP and set the LUN to 1.  Applied Server Profile.   Once complete went back into the SP and now it says Boot:  Managed Manually and it is grayed out (can't change)

 

Thanks,

-MattGG

3 REPLIES
MeFromil
Advisor

Re: Problems trying to create boot from SAN Server Profile in OneView

hi 

Is the server Power Off ? 

 

ChrisLynchHPE
Neighborhood Moderator

Re: Problems trying to create boot from SAN Server Profile in OneView

Did you by chance set the Boot Order to Manage Manually?  If you did, it would clear the Boot Parameters within the Connections.  You must Enable 'Manage boot order' in the Server Profile in order to set the BfS settings in your Server Profile Connection(s).

Mladen_1
Occasional Advisor

Re: Problems trying to create boot from SAN Server Profile in OneView

Hi,

I have not FlexFabric but VC-FC (bay3 and bay4) trying to BFS but unsuccessfull.