Operating System - HP-UX
1753440 Members
4935 Online
108794 Solutions
New Discussion юеВ

syslog instl_bootd error message

 
SOLVED
Go to solution
Lonny Balderston
Frequent Advisor

syslog instl_bootd error message

The following message was logged in my HP9000's system log during the middle of the production day: "May 9 10:39:29 icgsca1 instl_bootd[14365]: instl_bootd: No available IP address found in: /etc/opt/ignite/instl_boottab". What might have caused this? We would not have been doing any system work at this time (playing with Ignite, or whatever). Thank you.
2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: syslog instl_bootd error message

Shalom,

Most likely the bootd mini DHCP server has all its addresses handed out or is in conflict with real IP's on the network.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Scot Bean
Honored Contributor
Solution

Re: syslog instl_bootd error message

Messages like this can appear when any machine on your network queries the network with a properly formatted 'bootp' request to a certain port.

Usually, this kind of request arrives from PA HP-UX servers when attempting an Ignite LAN boot from the the machine's firmware prompt, such as the command
'boot lan.1.2.3.4 install'

It sounds like somebody was trying to Ignite over the LAN, and you have not configured this feature.