BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Showing results for 
Search instead for 
Do you mean 


Occasional Visitor


have a app that is aborting with the following message:
Connecting to SDE...
/usr/lib/ Unresolved symbol: xdrmem_create (code) from /ora10/app/sde/sd
zonea15: 6099 Abort(coredump)

xdrmem_create is in /usr/lib/libc.1. Works fine on the development computer (HP700) but not on this one (HP800). Both running HPUX 11.00 and both have same patches.

any ideas?
Honored Contributor

Re: xdrmem_create

OK, just two quick thoughts,

1. Check those patches and make sure they show configured...
2. Check your SHLIB_PATH, make sure it's right and set to all the library directories it lib /usr/lib etc...


Re: xdrmem_create

On my HP-UX 11.0 L2000 system, libc.1 has the xdr routines, but libc.2 does not. points to libc.2 in this case.

I ran into problems with the xdr_mem routines missing previously and found that linking in libnsl did the trick. Give this a shot.