HPE Community
MSA Storage
1827706 Members
2725 Online
109967 Solutions
New Discussion

Management controller failed

 
SOLVED
Go to solution
AdemWOLF
Occasional Contributor

‎06-20-2017 05:50 PM

‎06-20-2017 05:50 PM

Management controller failed

HI ALL

We have a shared storage SN 2S6938D039, unfortunately we can't connect to it via web, ssh, telent, so we will try to restart the Management controller via cli port, in the interface of controller cli port is wrote SR232 micro-DB9.
Can anyone please share the cable reference should i use .

Thanks

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎06-21-2017 12:09 AM

‎06-21-2017 12:09 AM

Solution

Re: Management controller failed

>> We have a shared storage SN 2S6938D039, 

 

According to partsurfer this is a MSA2000 G2 SAS

If you look at this page

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02754961

you need the serial cable 508297-001

50008199_2


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.