MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

scripting for the HBA WWN/IEEE ID - HELP!!!!!

 
dentistcorn
Regular Advisor

scripting for the HBA WWN/IEEE ID - HELP!!!!!

Has anyone figured out a way to script pulling the IEEE or WWN ID for a CPQKGPSA HBA?

We have a good deal of servers and trying to pull those numbers is a very manual process.
5 REPLIES 5
BR757138
Occasional Advisor

Re: scripting for the HBA WWN/IEEE ID - HELP!!!!!

If you have a lot of servers ou might want to try HBAnyware from emulex. Currenly I don't have a way of pulling it with WMI or something. Another way of doing it to have a look at HP Systems Insight manager. I think ou will find some info in there. You can create reports so you have the possibility to get an overview of all your servers with the corresponding HBA's.


Regards
Erwin van Londen
HP Master ASE SAN Architect
http://www.hitachi-storage.com
dentistcorn
Regular Advisor

Re: scripting for the HBA WWN/IEEE ID - HELP!!!!!

Thanks for the response. Actually, HBAnyare isn't recommended or supported by HP. And, I woould not want to have to load this on a production high visibility server.

But.. the Insight Manager solution is interesting.
CA1135231
Occasional Advisor

Re: scripting for the HBA WWN/IEEE ID - HELP!!!!!

With some success, I've used hbaverify http://sourceforge.net/projects/hbaverify/

it's version 0.1, caveat emptor :)

/charles
BR813175
Occasional Visitor

Re: scripting for the HBA WWN/IEEE ID - HELP!!!!!

I asked the same question in the HP SIM forum but noone seemed to know of a way to get it from insight manager.
Uwe Zessin
Honored Contributor

Re: scripting for the HBA WWN/IEEE ID - HELP!!!!!