Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
cancel
Showing results for 
Search instead for 
Did you mean: 

installing error message

wali chabi
Frequent Advisor

installing error message

I'm reinstalling HP-UX 11.00 in the server hp 9000 K class from the DVD drive.I used the Advenceved option to configure the parameters. After setting all the parameters i start the installation by enter the GO!field. The warrning message as "the disk was not empty....." was display and I contnued the installation. When it has started creating the volume groups, it began to display the following message:
(LVM: PV0 has been returned to vg[0]
LVM: vg[0]:pvnum=0(dev_t=0x1f003000)and nothing is done
Please help me
1 REPLY
skt_skt
Honored Contributor

Re: installing error message

after you say GO it will list the disks/paths whihc are going to be over written. are u getting the right disks/path there?