Network Simulator
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Comware Lab L2VPN Support

Pete W
Valued Contributor

HP Comware Lab L2VPN Support

Any idea whether the new HP Comware Lab (7.1.59) supports L2VPN?

I'm asking as I'm pretty sure that the previous version didn't.

 

Regards,

 

Peter

MASE
CCNP
Meru MCSE
2 REPLIES
IngoH
Occasional Advisor

Re: HP Comware Lab L2VPN Support

Hello Peter,

 

7.1.59 does not. You can configure it, but no traffic seems to go through (e.g. after sending a ping one side shows the partners MAC in ARP table, other side does not, seems like unidirectional traffic?).

Same for VPLS.

 

Best regards,

Ingo

IngoH
Occasional Advisor

Re: HP Comware Lab L2VPN Support

Hello,

To my experience MPLS L2VPN as well as VXLAN/EVPN do not work with bridged-ports in the simulator; can be configured but traffic is not flowing. However they work perfectly using a routed port towards the end-node.

Try for having traffic untagged / access port:
interface GigabitEthernet1/0/1
port link-mode route
xconnect vsi <VSI-Name>

Example adding a tagged VLAN; use a sub interface:
interface GigabitEthernet1/0/1.10
vlan-type dot1q vid 10
xconnect vsi <VSI-Name>

Best use a router manual for reference on the setup, i.e. VSR1000 manuals.

Regards,
Ingo