Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

mpeg cant convert to dat

vit_4
Occasional Advisor

mpeg cant convert to dat

i have convert an image file to .mpeg using easyVCD and trying to convert it to .dat using nero burning rom but i always get this message.

mpg was invalid, need mpeg-1 which was encoded for video-cd.
audio:44.1khz stereo:224Kbit/s
video:352x240/29.97Hz or 352x240/23.97Hz or 352x288/25Hz

the following problems are found:
-stream encoding which is invalid for a [Super] Video-CD
-no video
-no audio
1 REPLY
Ganesh Babu
Honored Contributor

Re: mpeg cant convert to dat

Your file contains 2 channel sound instead of stereo, welcome to an old club! You do not say what the source of your MPEG file is or from where? Usually if you turn off conformance the file burns OK and plays on the DVD player

Hope this helps..

Ganesh