Operating System - OpenVMS

la324 printer

 
SOLVED
Go to solution
sc_2
Occasional Contributor

la324 printer

I have an old la324 multiprinter, the baud was set at 4800. How to set it to 9600 can't find anywhere how to change it.
Thanks!
3 REPLIES 3
Lokesh_2
Esteemed Contributor

Re: la324 printer

Hi,

Baud rate 4800 is default for la324 printer. To chang the baud rate, you have to play with setup menu.

Enter the setup menu , and then play with different keys ( up , down, select ...etc ). When you see the Baud rate menu, enter in it and select 9600 ( an * will show current set value ).

HTH,
Best regards,
Lokesh
What would you do with your life if you knew you could not fail?
Ron Kruger
Advisor
Solution

Re: la324 printer

Hi
To enter setup, Power up the printer while holding the SETUP key.
Use the UP or DOWN arrow keys to select BAUD.
Use the RIGHT or LEFT arrow keys to select 9600.
Use the SELECT key to set 9600.
Use the SETUP key to save the setting and return to normal operation.

Good Luck
Ron
sc_2
Occasional Contributor

Re: la324 printer

Thanks you ! got it fix
now the printer running good now.
SC