Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding a scsi device with hwmgr command

SOLVED
Go to solution
WilliamSmith11
Super Advisor

Adding a scsi device with hwmgr command

Hi
I have a system running Tru64 5.1B.I want add a scsi device Without powering off the system.

I know that with the hwmgr command is possible but I cant find out the right command , somebody may help me please.

Thank you

W.S
2 REPLIES
Mark Poeschl_2
Honored Contributor
Solution

Re: Adding a scsi device with hwmgr command

After physically connecting the device (assuming it supports hot-swapping), execute:

# hwmgr -scan scsi

This should detect the new device and get all the necessary /dev special files set up for you. After a short delay try:

# hwmgr -view device

and your new device should be visible.
Ralf Puchner
Honored Contributor

Re: Adding a scsi device with hwmgr command

Have a look into the admin guide, it will describe in detail hardware management.
Help() { FirstReadManual(urgently); Go_to_it;; }