Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

KZPCC - Component missing

A.W.R
Frequent Advisor

KZPCC - Component missing

Hi,

We have just replaced a KZPCC controller on an AlphaServer ES45 with Tru64UNIX.

When we started up the system, the RAID controller saw all the disk drives, but also reported a "component missing" for a particular disk drive bay. This disk drive bay does not have a disk drive installed, and has never had a disk drive installed.

The RAIDset has come up, but it is in a degraded state.

Is it possible to fix this problem without having to rebuild the whole RAIDset?

Thanks
Andrew
1 REPLY
Pieter 't Hart
Honored Contributor

Re: KZPCC - Component missing

the "component missing" statement probably comes from a previous configuration where this controller was used.

afaik the kzpcc stores it's raid-config in NVRAM.
You'll have to match the existing configuration and write it in nvram.
this does not neccesarily mean rebuilding the whole RAIDset.

I suggest you clear the KZPCC's config before attaching it to the disks.
then power-down, attach disks and power-on.
After this it may even detect itself the curent configuration and you have the chance to update the NVRAM with the current disk configuration without losing data.