Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

Replace system disk on 4.0G

Paul_564
Occasional Advisor

Replace system disk on 4.0G

Hi,
Dont usually do this so need some help. I have a blown disk which is one part of a mirrored pair. and part of a volume. The disk is showing detached in LSM ( white ).

I need to replace the disk is it just a case of using voldiskadm and selecting replace failed or removed disk?

Do i need to disklabel the replacement disk first? or does voldiskadm take care of all of that.

Any help would be most gratefully received

cheers
Paul
1 REPLY
Mohamed K Ahmed
Trusted Contributor

Re: Replace system disk on 4.0G

Check these docs
The complete documentation sets are at http://h30097.www3.hp.com/docs/pub_page/doc_list.html

For non-boot devices, have a look in chapter 6.4.5 on

http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V51B_HTML/ARH9BDTE/TITLE.HTM

Chapter 6.4.6 gives the explanations for bootdevices.

This docs are for 5.1, I couldn't find for 4.0G, read through them and see if they are helpful

Regards