Deploy Server using USB with Intelligent Provisioning

[fsaraiva]

Hi,

I have a server HPE ProLiant DL320e Gen8 v2 with NVRAM error to read or reinstall Intelligent Provisioning, it is not a production server and it is out of HPE support contract. But I need to reinstall the Operating System (which is Linux) and I'm facing some errors due a missing RAID driver.

There is a way to boot the Intelligent Provisioning from a USB and iniatiate this installation this way? Like the old HP Smart Start?

Thanks

[SanjeevGoyal]

Hello,

Please follow customer advisory.

Advisory: (Revision) HP ProLiant Gen8 and Gen9 Servers - How to Install/Reinstall Intelligent Provisioning (IP) if It Does Not Launch After Pressing F10 During Power-On Self-Test (POST)

https://support.hpe.com/hpesc/public/docDisplay?docId=c03693433

Intelligent Provisioning Recovery Media

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a2b2caf8066e4a8b82a966d628#tab4

If the issue still persists use the latest SPP 8.1 for the Gen8 server. 

NOTE: Make sure you have the complete data backup before use SPP 8.1

Service Pack for ProLiant

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a2b2caf8066e4a8b82a966d628#tab4

Please let us know for further assistance.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

Sanjeev