HPE Community
ProLiant Servers (ML,DL,SL)
1827728 Members
2755 Online
109968 Solutions
New Discussion

Re: Low level errors receiving data using TCP/IP

 
khburrell
New Member

‎03-17-2013 07:22 PM - last edited on ‎03-17-2013 09:51 PM by

‎03-17-2013 07:22 PM - last edited on ‎03-17-2013 09:51 PM by

Low level errors receiving data using TCP/IP

I am using a DL360/G6 server with 2 CPUs. I begin getting a low level of receive errors when using TCP/IP using a NC382i NIC card.  The errors begin when a large amount of data is received by the server. Any others having problems  with TCP/IP? We actually have our own protocol that bypasses TCP/IP and when  we use that instead of TCP/IP we do not see the receive problems.

 

 

P.S. this thread has been moevd from Servers > General to ProLiant Servers (ML,DL,SL) - Hp forums moderator

0 Kudos
Reply
1 REPLY 1
Johan Guldmyr
Honored Contributor

‎03-17-2013 11:58 PM

‎03-17-2013 11:58 PM

Re: Low level errors receiving data using TCP/IP

Running several DL360G7 (also has NC382i), two TCP/IP LACP bonds on each machine. One going to an extreme switch and another to an HP procurve. Likely not optimal configuration in regards to lacp-mode on switch but it's working.

 

ifconfig|grep errors shows zero errors on all devices.

Not seeing any errors on the switch sides on the client ports either.

 

1 CPU.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.