HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Low level errors receiving data using TCP/IP

Occasional Visitor

Low level errors receiving data using TCP/IP

I am using a DL360/G6 server with 2 CPUs. I begin getting a low level of receive errors when using TCP/IP using a NC382i NIC card.  The errors begin when a large amount of data is received by the server. Any others having problems  with TCP/IP? We actually have our own protocol that bypasses TCP/IP and when  we use that instead of TCP/IP we do not see the receive problems.



P.S. this thread has been moevd from Servers > General to ProLiant Servers (ML,DL,SL) - Hp forums moderator

Johan Guldmyr
Honored Contributor

Re: Low level errors receiving data using TCP/IP

Running several DL360G7 (also has NC382i), two TCP/IP LACP bonds on each machine. One going to an extreme switch and another to an HP procurve. Likely not optimal configuration in regards to lacp-mode on switch but it's working.


ifconfig|grep errors shows zero errors on all devices.

Not seeing any errors on the switch sides on the client ports either.


1 CPU.