ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

New SmartArray controller

SOLVED
Go to solution
rdwild
Occasional Contributor

New SmartArray controller

I have an ML350 Server with a SmartArray 641 controller.  The controller is reporting that the batteries have failed, and write-back cache is disabled.  I have another SmartArray 642 controller I plan on replacing the 641 with.  How do I get the 642 controller to recognize the array as it was configured on the previous controller.  When I boot with the new controller, I only have the option to create a new logical drive.

1 REPLY
Jimmy Vance
HPE Pro
Solution

Re: New SmartArray controller

Thearray configuration is actually stored in the RIS area on the disks themselves and not the controller. Make sure the new controller has the latest firmware installed.  Older firmware may not recognise a configuration created by newer firmware




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!