ProLiant Servers (ML,DL,SL)
1745812 Members
3920 Online
108722 Solutions
New Discussion юеВ

SCSI RAID controller setup help

 
ServantGrunt
Visitor

SCSI RAID controller setup help

Good day, I tried in any way to configure the controller but I can't get around it and I need some help. I recieved an old HP ProLiant ML330 G3 with an ASC-29160i SCSI controller card and 2 SCSI HDD. When I boot up the server, it beeps twice and writes on screen "162 - System Options Not Set". I tried everything on the internet without success. Can you guide me somehow? Thank you very much.

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: SCSI RAID controller setup help

Because of the age of the server the CMOS battery may be empty, so the BIOS settings will no longer be stored, Check and replace the battery and reset the BIOS to defaults.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ServantGrunt
Visitor

Re: SCSI RAID controller setup help

Hi Torsten, thank you for your input. I believe if the CMOS battery was empty, I'd notice the time changing back to default everytime. The server keeps the time setup even after days of not being plugged in and be turned on, so I believe the CMOS battery's still alive.