Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

RILOE II firmware upgrade error

Sean Fitzpatrick
Occasional Visitor

RILOE II firmware upgrade error

Trying to upgrade firmware from 1.11 to 1.12 on several RILOE II's. All succeeded but one, and I've tried all the steps to reconfigure the card (DR mode, reset to factory settings). Any help or suggestions?
3 REPLIES
Junior Yharte
Trusted Contributor

Re: RILOE II firmware upgrade error

Can you be more specific as to the error youâ re getting? Does the rompaq (diskette) upgrade fail as well? You can force it by flipping switch 3 on the R-II and booting up w/ the firmware disket
Sean Fitzpatrick
Occasional Visitor

Re: RILOE II firmware upgrade error

Yes, I tried that as well, with no luck. Right now I have set switches 3 and 4 to on to bypass the error but I still need to reconfigure the card. The error I get when all switches are set to normal is 'Error 10002: The card is not responding', or similar wording.
Junior Yharte
Trusted Contributor

Re: RILOE II firmware upgrade error

Sean, switch 3 and the rompaq disk should correct the problem unless there is a physical problem with the board. Is there a message when the flash starts from the disk or does it say no board found?