Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Using IPMI over ILO2

SOLVED
Go to solution
romain0412
Advisor

Using IPMI over ILO2

Hi,

I have to monitor some HP Poliant DL380 G6. I've used IPMI protocole on other server (other brand). I wan to use IPMI on ILO2 but I don't find this on the interface.

I've read on an other thread that HP use an another tool, SMASH? I don't know it and don't find how to user it.
4 REPLIES
Oscar A. Perez
Honored Contributor
Solution

Re: Using IPMI over ILO2

IPMI support was added in the new iLO2 v2.00 that was just released last week.

iLO2 v2.00 Enhancements/New Features

- New HP Intelligent Power Distribution Unit
- Fully Qualified Domain Name (FQDN) for imported certificates
- A Recovery Payload that will help users recover iLO 2 from a failed firmware upgrade via FTP. Additional details can be found - in the new User Guide which can be found at http://www.hp.com/go/ilo
- "IPMI over LAN" functionality. The IPMI 2.0 RMCP+ (or Linux ipmitool "lanplus") protocol is supported with this release.
- IPMI Serial Over LAN (SOL)
- Data Center Manageability Interface (DCMI) v1.0 specification
- Enhanced the "in band" Intelligent Platform Management Interface (IPMI) to comply with the IPMI specification version 2.0



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
romain0412
Advisor

Re: Using IPMI over ILO2

Great :-D.

But I search this new firmware but I don't find it. I wan't to upgrade the ILO by web acess, since the operating system is not yet available.

Thanks for your great help.
Oscar A. Perez
Honored Contributor

Re: Using IPMI over ILO2


Download Windows Online Component:
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1443420321/v60898


Download Windows Online Component 64 bit:
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p2023401934/v60896


Download Linux Online Component:
ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1285463034/v60899



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
romain0412
Advisor

Re: Using IPMI over ILO2

Thanks,

I will try it !