HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO 5 Configuration Utility—Enables or disables the iLO 5 Configuration Utility

 
SOLVED
Go to solution
Salton
Occasional Visitor

iLO 5 Configuration Utility—Enables or disables the iLO 5 Configuration Utility

I have DISABLED this option From the System Utilities screen, select System Configuration > iLO 5 Configuration Utility > Setting Options.

Now, I do not see iLo 5 configuration Utility menu item. How do I enable this option again. I have tired factory default and also reset the system by taking the battery out but nothing works.

Please Help!

I do see this in the user manual but it doesn't talk about how to Enable it.

If this option is set to Disabled, the iLO 5 Configuration Utility menu item is not available when you access the UEFI System Utilities

I am running HP DL360 Gen10 Server

1 REPLY
Salton
Occasional Visitor
Solution

Re: iLO 5 Configuration Utility—Enables or disables the iLO 5 Configuration Utility

 

The following procedure works for me:

 

  • Power down the server and remove the access panel of the server
  • Locate the System Maintenance Switch and flip Switch number 1 and power on the server
  • Navigate  to the BIOS(System Utilities) and you should have the iLo Configuration option available again now, Enable the option and save and shutodwn system and flip witch back