Server Management - Remote Server Management
1747988 Members
4851 Online
108756 Solutions
New Discussion

Re: iLO3 not responsive on web interface

 
Flaviu
Member

iLO3 not responsive on web interface

Hi,

I have a problem with multiple DL120G7 with iLO3, FW is 1.26
The web interface becomes unreachable via browser, while ping on IP-address is still possible. 
I have tried IE and Chrome with the same result, so it is not a browser problem.
If I get through SSH into the ILO and CD /map1 and then reset, suddenly the web interface start working again. I can't find any error log, and I don't know how to replicate it exactly. From time to time after some web logins it stop working. I don;t have any Nessus or Foundstone in the network.
I have the same issue with multiple servers!

Any ideas how to get the iLO running stable?

Thanks in advance!
1 REPLY 1
Oscar A. Perez
Honored Contributor

Re: iLO3 not responsive on web interface

iLO3 could have run out of SSL sessions. If you have a client opening HTTPS connections to iLO3 but not doing the SSL handshake and then leaving that TCP connection open forever, iLO3 will not timeout these connections and could eventually run out of SSL sockets. We are fixing this issue in a new iLO3 version we are releasing this month. Next time it happens, please capture a network trace so, I can confirm that you are running into this known issue.




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!