Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

Creating Custom Baseline

Occasional Visitor

Creating Custom Baseline


What is the process of creating a custom baseline for HPE SIM?  Here's what I did but it is not working, what did I do wrong?

1. Download required firmware/drivers

2. Copy them in the VCRM Repository

3. Create a custom baseline including the new firmware/drivers

4. Once it appears in HPE SIM, apply it to equipment

5. Run the tasks Software Version Status Polling

The problem I have after that is that when I compare the equipment with the baseline, it says "No Data".  But when I look at the equipment itself, everything has been discovered, so the credentials are fine.  What should I try?


Honored Contributor

Re: Creating Custom Baseline



If you want to update your server by using a custom baseline you should look at HP SUM for creating a baseline and updating.

HP VCRM is an old way of updating your servers. Use a base SPP and create your own baselines from there.

Kind regards,