get firmware version for 100 ILO's

[Steven Baillie]

I have SIM 5.0 SP4 installed and I am running Custom commands.
I am running the following batch file from SIM.

****(GETILOFW.BAT)
C:\scripts\Cpqlocfg\cpqlocfg -s %DEVICENAME% -l C:\scripts\Cpqlocfg\logs\getFW\%DEVICENAME%log.txt -f C:\scripts\Cpqlocfg\Get_FW_Version.xml
****

this runs the following XML file
****







****


When I run the batch file to 1 ILO it runs fine. (No in SIM)

If I run it from SIM to the same server, the custom command completes succesfully but no output is created.

If I use the custom command, the command always completes successfully but only works for about 6 ILO then stops.

What can I do to get the information from my 100 ilo's

P.S. I had a previous problem with upgrading the ILO firmware is 5.0 (So SP) but this does not fix it.

see http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=960091



steven