ML30 with Smart Array E208i-p Controller

[benguest1983]

Hi

I have a ML30 and a E208i controller. Currently in the server the hard drive bay has a cable from port 1 to the motherboard. I now have a cable to to go from either port 1 or 2 or the E208i. Do I connect this to port 2 on the back of the hard drive bay or remove the lead that’s currently in port 1?

I’m used to working with ML350 so not had to do the previously

[Anu_K]

Hello,

You could follow the cabling instructions listed in this document : https://support.hpe.com/hpesc/public/docDisplay?docId=a00063986en_us&docLocale=en_US

For additional information regarding the controller, you could check this link: http://itdoc.hitachi.co.jp/manuals/ha8000v/hard/Gen10/SA/879006-002_en.pdf (From pg.53)

Hope it helps!

Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."

[benguest1983]

Hi

Thank you for the repose. I can see that I need two mini SAS cables and not only the one I was sold. Thank you

Kind Regards

Ben Guest

DVS Technology Group Ltd
Stourbridge Road Industrial Estate
Faraday Drive
Bridgnorth
Shropshire
WV15 5BA



The information contained in this email is intended only for the individual or entity to whom it is addressed. It may contain confidential information. If you are not an intended recipient you must not copy, distribute or use the information. Unless expressly stated, opinions in this email are those of the individual sender and not those of the above companies.

All quotations provided by email or proposal are subject to the above companies General Terms and Conditions and can be provided on request or found on our website www.dvs-group.co.uk

DVS Technology Group Limited. is a company registered in England and Wales under number 12450072 at the above address, VAT number 342215242.

DVS Voice and Data Limited is a company registered in England and Wales under number 12444856 at the above address, VAT number 341742808.

DVS Managed Service Limited. is a company registered in England and Wales under number 12450132 at the above address, VAT number 342210453.

[Sebasbin]

Hi,

Need to connect SAS cables from both the port on E208i-P controller to the Hard drive back plane .

Please refer the below ML30 Gen10 server user guide for cabling instructions  and Quick specs for supported controller/SAS cables 

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00059225en_us

https://support.hpe.com/hpesc/public/docDisplay?docId=a00063986en_us&docLocale=en_US

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00053821enw#

[benguest1983]

Hi

Thank you. I thought this was the case. I will get on to sales to get the missing cable


Kind Regards

Ben Guest

DVS Technology Group Ltd
Stourbridge Road Industrial Estate
Faraday Drive
Bridgnorth
Shropshire
WV15 5BA



The information contained in this email is intended only for the individual or entity to whom it is addressed. It may contain confidential information. If you are not an intended recipient you must not copy, distribute or use the information. Unless expressly stated, opinions in this email are those of the individual sender and not those of the above companies.

All quotations provided by email or proposal are subject to the above companies General Terms and Conditions and can be provided on request or found on our website www.dvs-group.co.uk

DVS Technology Group Limited. is a company registered in England and Wales under number 1245007212450072> at the above address, VAT number 342215242.

DVS Voice and Data Limited is a company registered in England and Wales under number 1244485612444856> at the above address, VAT number 341742808.

DVS Managed Service Limited. is a company registered in England and Wales under number 1245013212450132> at the above address, VAT number 342210453.12450132>12444856>12450072>0330>