RemoteCopy and Backup with Windows

[andre_muc]

i will setup backup in my remote copy location

I have 2 different management groups with 2 different Clusters.

i setup a normal volume at the primary site and configure "new schedule to Remote Snapshot a Volume .."
the system creates at the backup site a RemoteCopy Volume and copy all snapshots into this volume. fine.

My Problem:
now i will backup the data on the backup site, but i can not mount this data with the iscsi initiator.

I found in the document Remote Copy User Guide the point "Using Remote Copy for off-site backup and recovery" but i found not my configuration problem.

Thanks in advance!

Andre

[andre_muc]

it's to easy.
for backup in the remote location you must mark the option "include primary volume".
than you can mount the valid snapshot at the remote site for backup