Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

ProCurve configuration backup

abdullah shboull
Frequent Advisor

ProCurve configuration backup

Hello all, I have 200 switches 2626,2610,2810,5412 and other type, and I have PCM+2.3, the question is what is the simple way to take a configuration backup from the all switches with short time?
4 REPLIES
Michael_Breuer
Esteemed Contributor

Re: ProCurve configuration backup

Hello,

you will find a policy like "Scan config files" within the policy manager. It is one of the default policies and should be already there. You can schedule this policy to run i.e. during each night. You will find the config files in a dedicatd tab in each device.

Cheers,

Michael
www.ingentive.net
Ingentive Networks GmbH
abdullah shboull
Frequent Advisor

Re: ProCurve configuration backup

Thanks for your response,
I want to clarified something, that is, the backup configuration is need to save it on storage device. And the PCM police is used to discovery any devices configuration changed not to backup the configuration, meaning the startup-config
kindly advice
Michael_Breuer
Esteemed Contributor

Re: ProCurve configuration backup

Basically the scan policy will collect the running configs. You can configure the PCM to collect more than 1 config for each device. So you have an archive for example 4 configs of each switch. In most cases this should be sufficient as backup concept.

Cheers,

Michael
www.ingentive.net
Ingentive Networks GmbH
abdullah shboull
Frequent Advisor

Re: ProCurve configuration backup

thx
I find the way by choos the device list and there is a button called export config and you will find the config file on PCM folder