DL20 G9 not seeing smart array p440

[Kissel-B]

I have a DL20 G9 that came with a P440 smart array card in pcie slot 2. I have a pcie ssd in slot one which the server boots off. I am trying to use the 4 SAS drives but the server does not see the P440 in slot 2 or in the bios is states that slot 2 is not populated. I have reseated the card multiple time and the card has power and activity lights. The only smart array listed is the B140i. I have tried to disable it but the is no physical connections to the drive backplane except from the p440. Any ideas?

[BPSingh]

Greetings!

As per server quickspecs, P440 needs to be populated in slot 2 (Full Height) which I think is already installed as per your description. 

Since you have mentioned that in the bios it states that slot 2 is not populated and already reseated the card. 

Please try clearing the NVRAM using the "System Maintenance Switch:" and check the result. 

Refer page# 83 and 85 

https://support.hpe.com/hpesc/public/docDisplay?docId=c04903922