Multipathing setup for iSCSI connection to XenServer

[chrisp10]

I have a Nimble array that has been configured with 2 iSCSI Data IP Addresses and 1 discovery address.  My XenServers have 2 NICs configured for iSCSI connectivity and are on the same subnet as the 2 data and 1 discovery addresses on the Nimble.  I have connectivity from teh XenServer to the array and can connect fine, however it is only using one connection.  I have used the discovery address to connect the XenServer to the Nimble but I need to get connectivity via both NICs for multipathing to work.  I am used to working with VMware ESXi and so am looking for how to use both NICs on XenServer to be used for the iSCSI connection

Thanks

Chris

[mamatadesaiNim]

Similar to ESXi port binding, does this help?  https://support.citrix.com/article/CTX138429