cancel
Showing results for 
Search instead for 
Did you mean: 

blade system c7000

 
Highlighted
Occasional Advisor

blade system c7000

no lame works on 7th slot down. the midplane assy has been already changed but th lame still not work on the same slot but work on another
10 REPLIES 10
Highlighted
Honored Contributor

Re: blade system c7000

what do you mean with 'lame'?

7th slot down, so is that blade bay 15 or the 7th interconnect module?

checked firmwares??
Highlighted
Occasional Advisor

Re: blade system c7000

hello,
i'am sorry so the bay 15 does not work even if i change the module
Highlighted
Honored Contributor

Re: blade system c7000

please define 'work'

boot up?
network connectivity?

checked firmwares yet?
Highlighted
Occasional Advisor

Re: blade system c7000

thanks johan
it is to say that bay 15 does not come and when i put another module it's the same
i see a red led on plugged module.
But the modules turn properly in other bay!
Highlighted
Honored Contributor

Re: blade system c7000

do you have enough power?
Highlighted
Occasional Advisor

Re: blade system c7000

boot up if you want
Highlighted
Occasional Advisor

Re: blade system c7000

6 power supplies
Highlighted
Honored Contributor

Re: blade system c7000

But maybe you have a strict dynamic power setting?
Highlighted
Occasional Advisor

Re: blade system c7000

what should i understand about this