Blade system

[itsme]

We have just received a c7000 and 4 1/2 height blades. I have been searching at docs.hp.com for the 'must have' docs as we are all newbies with this hardware type. So far not very successful in finding all the right stuffs (HW setup, config, power, redundancy, etc..) . Can someone point me to the right direction, thanks in advance.

[Marek Nelec]

Try looking here:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=329290&prodSeriesId=1844065

[Magnus Bernhardson]

Depending on what kind of blade you have purchased ,the first place to visit is the serverpages.
BL465C for example:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodSeriesId=2510357&prodTypeId=15351

There you will find all the drivers,firmware updates and documents you need.

Regards Magnus Bernhardson

[itsme]

Thank you both.