Cannot boot BL460 G10 from USB Key

[dbarratt1]

Hi,

I'm struggling to boot our new BL460 Gen 10 from a bootable USB key containg VMware ESXi.

I know the image on the key iteslf works I've tested it on other hardware but the blades just ignore it. I've plugged the key into the USB socket on the front of the blade. Should this work?

This is my first experience with the Gen 10 models, plus usually we buy rack mount servers so this is new to me. Has anyone else seen this and do they have any suggestions as to what I can fo to fix this.

Blades are brand new out of the box and no settings have been changed.

Thanks in advance.

[SanjeevGoyal]

Hello,

Please follow the below BL460c Gen10 documents for more clarification.

HPE ProLiant BL460c Gen10 Server Blade User Guide ( Page no-68)

https://content.etilize.com/User-Manual/1040919132.pdf

Troubleshooting Guide for HPE ProLiant Gen10 servers ( Must follow the page no 112)

https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00017522en_us-10.pdf

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,