HPE Community
BladeSystem - General
1753880 Members
7604 Online
108809 Solutions
New Discussion юеВ

Compatibility Confirmation

 
navdeep_1
Occasional Contributor

тАО06-08-2010 05:33 AM

тАО06-08-2010 05:33 AM

Compatibility Confirmation

Hello

I will have 2 HP BL460c with 2 running HyperV and 3 VMs per Server - on the Interconnect I have Flex10 modules and outside will have P4000 G2 SAN box - please advise if this is supported combination...thanks
0 Kudos
Reply
3 REPLIES 3
Adrian Clint
Honored Contributor

тАО06-08-2010 06:45 AM

тАО06-08-2010 06:45 AM

Re: Compatibility Confirmation

Yes it will work. Supported by who? HP or Microsoft?
You will need network switches between the Flex-10 and the P4000.
0 Kudos
Reply
navdeep_1
Occasional Contributor

тАО06-08-2010 07:01 AM

тАО06-08-2010 07:01 AM

Re: Compatibility Confirmation

Hi
thanks - Supported by HP
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО06-08-2010 07:18 AM

тАО06-08-2010 07:18 AM

Re: Compatibility Confirmation

For such information lookup SPOCK:

http://h20272.www2.hp.com/

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.