Device degraded

[Yolanda Isabel Márquez]

Hi all,

I have a problem with an enclosure C7000, in server profiles appears an erron in all servers "Degraded", alreay reboot the virtual connect and this error still.

Thanks in advance!!

[John Cagle]

Click on the "Domain Status" blue link in the "Domain Status" window -- it should show more information on the problems.

Have you tried rebooting any of the blade servers to see if the Degraded status goes away?

[The Brit]

Hi Yolanda,
Couldn't view your attachment. can it be converted to Wordpad or NotePad.

Dave.

[WFHC-WI]

You have one warning alert showing. Whatever is generating this warning alert is also causing each profile to display as "degraded." It may be a failed interconnect module or possibly an interconnect module with no live uplinks.

Good luck.

[Neal Bowman]

Yolanda,
scroll down to the network section and check the status of each network you have created. one of your uplinks may be down.

[Dmitri Chubarov]

I once had this message on the insight display of an enclosure for one of the blades.

Taking the blade out and reseating it helped.

[GORDITO]

You can reset the blade with out having to reseat it by telneting / SSH into the OA and issue the following command.

reset server(Bay#)
Then type "yes"

This will cause the e-breaker to reset and fix the problem.

[Yolanda Isabel Márquez]

Thanks a lot all!!

My problem with OA its resulved, I rebooted one blade server. The status Degraded dissapear.

[Yolanda Isabel Márquez]

Thanks a lot all!!

My problem with OA its resolved, I rebooted one blade server. The status Degraded dissapear.