BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Embedded NIC BL460c G7 cannot detect when ESX process intallation

 
Highlighted
Occasional Advisor

Embedded NIC BL460c G7 cannot detect when ESX process intallation

Hi All,

i've problem with esx installation, for this case i'm use BL460c G7 to install ESX, when process loading driver, esx stack on loading 32 network driver.
but if i check on bios, the nic has detect.
when i'm try to install again the esx, the problem still same.

any solution for this problem


Thank's

Thanks & Peace

Thaufik Jonhar
4 REPLIES 4
Highlighted
Honored Contributor

Re: Embedded NIC BL460c G7 cannot detect when ESX process intallation

Highlighted
New Member

Re: Embedded NIC BL460c G7 cannot detect when ESX process intallation

i have the same problem on a BL490c G7. You must load the custom drivers at installation of ESX.
Highlighted
Occasional Advisor

Re: Embedded NIC BL460c G7 cannot detect when ESX process intallation

Thank's for your answer Michael & Xavier,

But, how to load the driver when the ESX not yet installed on the server??
i'm still confused for this progress...


Thank's a lot
Thanks & Peace

Thaufik Jonhar
Highlighted
Honored Contributor

Re: Embedded NIC BL460c G7 cannot detect when ESX process intallation

Hello,
you have to use custom drivers cd from vmware DURING ESX instalation...

Jan