Fully loaded C3000 AMP usage

[TDH24]

Hello all,

We are looking at implementing a C3000 chassis.  Along with the new chassis, we are implementing a Symmetra UPS that has four 30AMP connections and eight 20AMP connections.  We will split the six power cords from the C3000 among two PDUs connected to the Symmetra but I don't know if we should use 20AMP PDUs or the 30AMP?  Can anyone tell me how much amperage the C3000 would use if it was fully loaded? 

Thanks in advance!

Troy

[Robert_Jewell]

Product Bullitens (Quick Specs) is good for that type of info.

http://h18000.www1.hp.com/products/quickspecs/productbulletin.html#!spectype=worldwide&type=html&docid=12790

Look under Power Specs.

-Bob