HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.

[Jazz7]

Hi All

I encounter problem when I configure hp c7000 enclosure virtual connect manager. 

I have 3 network connection as below

• MGMT = interconnect Bay 1 x5 / Bay 2 x5
• All_Prod= interconnect Bay 1 x6 / Bay 2 x6
• DMZ= interconnect Bay 1 x7 / Bay 2 x7

Blade Proliant BL660c install with VMware vsphere as VMware host.

Server profile 

• LOM1:1a MGMT
• LOM1:2a MGMT
• LOM1:1c All_Prod
• LOM1:2C All_Prod
• LOM1:1d DMZ
• LOM1:2d DMZ

I have a VM client server with window Server 2012 with 2 Nic. Below are my problem.

Nic 1 = VLAN01 (All_Prod)

• Failed to ping gateway

Nic 2 = VLAN10 (DMZ)

• Able to ping gateway successful

If I use my own notebook plug into the physical switch port and hardcode my notebook tcp/ip setting to DMZ IP address, I am able to ping default gateway. 

Can anyone advise what went wrong on my configuration. 

Thank you

Jazz

[Adrian Clint]

Is All_Prod multiple VLANs?

Have you setup VLAN tagging correctly on the blade?