HPE Community
BladeSystem - General
1752448 Members
6133 Online
108788 Solutions
New Discussion

PCI Speed issues

 
BillStudley
New Member

‎10-12-2007 03:14 AM

‎10-12-2007 03:14 AM

PCI Speed issues

Has anyone had any issues with the PCI-X bus speed using the expander? I have a third party board that only wants to work at PCI-66MHz and not at anything greater. We've tried PCI-X at all speeds with no joy in Mudville.

We've tested the board in a DL380-G5 at PCI-X 133MHz and didn't run into any problems.
0 Kudos
Reply
1 REPLY 1
rick jones
Honored Contributor

‎10-15-2007 04:58 AM

‎10-15-2007 04:58 AM

Re: PCI Speed issues

Just for grins, what is the speed of the PCIe mezz slot on the blade to which you are connecting the expansion?

If you are running linux, a very verbose lspci command's output might be interesting, and perhaps it might be worthwhile to peruse the output of dmesg.
there is no rest for the wicked yet the virtuous have no pillows
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.