HPE Community
BladeSystem - General
1819800 Members
3207 Online
109607 Solutions
New Discussion

Raid Controller S100i SR gen10

 
PiyushL
Occasional Contributor

‎04-04-2021 11:55 PM

‎04-04-2021 11:55 PM

Raid Controller S100i SR gen10

Hi,

Currently i have 1 logical drive array with raid 1 configuration with 2 physical SATA HDD 1 TB each. I want to migrate from SATA HDD to SATA SSD. Can raid controller rebuild drive if i remove one 1 TB sata hdd and insert 1 TB sata ssd. And later once rebuild completes then i replace another sata hdd to sata ssd. This way i can migrate both physical drives to ssd instead of hdd.
Regards,
Piyush Luniya
9772712345
0 Kudos
Reply
1 REPLY 1
SanjeevGoyal
HPE Pro

‎04-07-2021 12:51 AM

‎04-07-2021 12:51 AM

Re: Raid Controller S100i SR gen10

Hello,

 

This is not possible.

 

You have you same or higher capacity hard drive and but same technology hard disks.


I am a HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.