Virtual Connect Support Utility (VCSU) update command

[chuckk281]

Pedrag had a question when updating Virtual Connect firmware:

***************

Does the options –oe / –of  and –we / –wf refer to VC FlexFabric too, or they are linked only to VC-Enet and VC-FC modules?

And what would be the best update command in VCSU during the firmware upgrade if we want avoid both module to be unavailable at time.

We MUST perform fw upgrade ONLINE, avoid all connections to be down during the upgrade.

Thank you.

************

Reply from Mark:

*************

Virtual Connect FlexFabric is a EnetModule so –oe and –we extension refers to VC 1/10, 1/10-F, Flex-10, Virtual Connect FlexFabric-20/40 F8 Module; HP Virtual Connect FlexFabric 10Gb/24-port Module; Virtual Connect Flex-10/10D Ethernet Module

And teh extension -of and –wf refer to VC 4Gb, VC 8Gb/20 and VC 8Gb/24 modules

************

Comments?