Got an application question?

[mkendall]

If you are a customer, prospective customer, VAR or HP sales or pre-sales and you have an application question on c-Class, this group or the Solution Builder group is the place to ask. Want to know if an application has been tested on BladeSystem? Want to know where to get some configuration information? Need to connect with an application vendor? Want to suggest an application for c-Class? Other? Ask here! And I would invite our Solution Builder members to jump right in if they see a question regarding their software or product. Thanks! Mike

[hrivnakdavid]

Interested in knowing if anyone has run Sybase (ASE 12 or 15) on a blade system.

[mkendall]

I don't know of anyone that has. Doesn't mean that they haven't! I will check some of my contacts. Regards, Mike

[David Fanning_1]

We have an application that is protected by a dongle - fitted to a 25 pin serial port. The blades or enclosure dont have provision for this. Or do they?

[chopper3]

If your application will work over one of those cheapo USB-to-serial adapter then I can't imagine it'll have a problem working off one of the front USB ports on a blade. Phil.

[David Orwig]

I'm finding very little documentation on the proper method for configuring Microsoft Cluster Services on W2008R2  using 460G6s connected to MSA2324G2 via 3GB SAS Blade Switches. I can present my volumes to the Blades, I can write to the common volume(s), but when tring to configure MSCS. I get a message during the test phase that says "Disk bus type does not support clustering." Any information would be well received.

Dave Orwig

[David Orwig]

I found the answer after some serious digging:

http://bizsupport.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01589395&lang=en&cc=us&taskId=101&prodSeriesId=3758996&prodTypeId=12169&docLang=en

[ChrisAatHP]

Another place to look for ISV solutions is in the HP AllianceONE Solutions Community which is dedicated to HP's development partners.  hp.com/go/allianceone/solutionscommunity