HPE Community
Communications and Wireless
1855946 Members
6393 Online
104107 Solutions
New Discussion

Re: Disabling wireless on nc8000

 
Ruben Lujan_1
New Member

‎10-26-2004 09:25 AM

‎10-26-2004 09:25 AM

Disabling wireless on nc8000

I have read the "Disable Wireless Networking and Bluetooth on NX9110" thread and agreed with the last response which is to hit the on/off button and then disabling the button on the bios. Then password protecting the bios. The only issue I have is that even after disabling the wireless button, the wireless LED still comes on. This does not give our customers a warm fuzzy feeling about our assurance that the wireless functions are turned off. Is there anything else I can try, other than removing the card?
0 Kudos
1 REPLY 1
Jarno Lepistö
Advisor

‎10-26-2004 10:34 PM

‎10-26-2004 10:34 PM

Re: Disabling wireless on nc8000

Hey.

You can allways cute the led wires :).. More serously, i think that the led is directly connected to that button, and if you have disabled wireless in bios it works just on/off button for the led.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.