Post Errors

[Ayman Altounji]

About every 4th or 5th boot I recieve the following error messages:
CPU Local Memory -- Quad word, random data ........................ Passed.
Forwarding Table Memory -- Word walking ........................... Passed.
Forwarding Table Memory -- Address line, random data .............. FAILED.

!!!
!!! -- FAILED Forwarding Table Memory -- Address line, random data --
!!!
!!! Reason: Memory test failed.
!!!
!!! Run number : 1
!!! Failed address : 0x0000081E
!!! Expected data : 0x B4
!!! Actual data : 0x 0
!!!

============================================================================

-- Options --

a. Continue with next test.
1. Restart unit.

If I hit continue it fails on the next test:
Forwarding Table Sorting & Aging .................................. FAILED.

!!!
!!! -- FAILED Forwarding Table Sorting & Aging --
!!!
!!! Reason: Unexpected (extra) MAT entry.
!!!
!!! Run number : 1
!!! Source MAC : 00-00-00-00-00-00
!!!

============================================================================

-- Options --

a. Continue with next test.
1. Restart unit.
Then I hit continue and get another error:
Packet Switching: Loopback @ MAC .................................. FAILED.

!!!
!!! -- FAILED Packet Switching: Loopback @ MAC --
!!!
!!! Reason: Additional packet received.
!!!
!!! Run number : 1
!!! Port : 17
!!! Speed : 100
!!! Loopback at : MAC
!!! Destination MAC : 72-99-4C-51-56-E8
!!! Source MAC : 52-BB-48-4B-4E-18
!!!

============================================================================

-- Options --

a. Continue with next test.
1. Restart unit.
If I contunue again:

Packet Switching: Loopback @ PHY .................................. FAILED.

!!!
!!! -- FAILED Packet Switching: Loopback @ PHY --
!!!
!!! Reason: Additional packet received.
!!!
!!! Run number : 1
!!! Port : 17
!!! Speed : 10
!!! Loopback at : PHY
!!! Destination MAC : 72-99-4C-51-56-E8
!!! Source MAC : 52-BB-48-4B-4E-18
!!!

============================================================================

-- Options --

a. Continue with next test.
1. Restart unit.
Again:
Packet Switching: Interport Forwarding ............................ FAILED.

!!!
!!! -- FAILED Packet Switching: Interport Forwarding --
!!!
!!! Reason: Delta total_frames_forward wrong: expected 2; actual 755.
!!!
!!! Run number : 1
!!! Source port : 3
!!! Destination port : 17
!!! Destination MAC : F2-11-3A-47-54-28
!!! Source MAC : B6-33-1A-25-30-4A
!!!

============================================================================

-- Options --

a. Continue with next test.
1. Restart unit.

If I hit continue again it will continue to boot. If I logon in and reset it chances are it does not happen again.
This is a brand new switch, should I send it back? I have just been doing testing and I have three hooked together via fiber.
Any suggestions?