HPE Community
Comware Based
1753867 Members
7264 Online
108809 Solutions
New Discussion

2948 Plus Issue with Windows Network

 
Jeff Arris
Occasional Advisor

‎06-24-2010 04:44 AM

‎06-24-2010 04:44 AM

2948 Plus Issue with Windows Network

I have two 3Com Baseline Switch 2948 Plus's in an edge switch location.



My central core is 3Com 5500G 48Port UTP/ 24 Port SFP / 24 Port SFP (Stacked).



All my other edge switches are Allied Telesis switches.



When I connect PC's through the 2948's they are not connecting to the network correctly, one way this is being shown is iff we update the domains active directory to push out software to clients connected via the 2948 they are not updating. As soon as we move them to another edge which has AT switches they update on first boot up.



I have lots of evidence to support this...screenshots etc.



I have backed up the configs from the two 2948's and wish to do a factory reset and re-apply of the configs...



Details from one of the 2948's:



 











































































































Product Description: 3Com Baseline Switch 2948 Plus 
System Name: Core-Edge#1 
System Location: Balcarras Core Cabinet 
System Contact: Jeff Arris 
Serial Number: 2TGGAVNEF4340 
Product 3C Number: 3CBLSG48 
System Object ID: 1.3.6.1.4.1.43.1.8.62 
MAC Address: 00:22:57:ef:43:40 
System Up Time: 47 days, 20 hours, 20 minutes, 49 seconds 
Software Version: 01.00.09 
Boot Version: 00.00.15 
Hardware Version: 1.0.1 




I believe they are on the latest software, please can someone confirm that there is nothing else I can try before I factory reset and re-apply the config?






Regards.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.