3com 4200g

[chinkiong]

Hi

I have created 2 VLANs.  vlan 1. is for server farm ( toatal about 10 units fixed ip servers) and


Vlan 2 is for PC  enviroment.


The IP ranges are  different VLAN 1 = 10.246.64.0/24 and VLAN 2 = 10.246.65.0/24

proposal an unit 3com 4200g as core switch , and 6 units departmental switches model is 3com 2928 to


 be install at JB office Local network environment.


presently firewall act as default gateway  , however that's several units of printer and


 photostate machine with fixed IP and default gateway, located at several departmental switches.

How am I supposed to go about setting up my VLANs and making sure


 I can get traffic from one to the other. Will just this 3Com 4200G be neccesary or do I need router configuration


or more hardware ?

[manuel.bitzi]

You need an additional L3-Switch, because your equipment does not support routing. (e.g. 4500, 4800, 5500...)

regards


Manuel