Hi all,
How many link aggregation groups does the 4210 26-port actually supports?
I'm trying to set up a 4210 26-port switch with 3 link aggregation groups, each group has 2 member interfaces only. The problem is that the 3rd group won't ever have both ports as "Selected" in the aggregation group. See output below:
Aggregation ID: 2, AggregationType: Manual, Loadsharing Type: NonS
Aggregation Description:
System ID: 0x8000, 0024-7346-6f10
Port Status: S -- Selected, U -- Unselected
Local:
Port Status Priority Key Flag
--------------------------------------------------------------------------------
Ethernet1/0/2 S 32768 1 {}
Ethernet1/0/14 U 32768 1 {}
The weird thing is that if I shutdown any interface of any other aggregation group, this interface 1/0/14 will become Selected !!
Why does this happen if in the 4210 26-port datasheet it says the device will support 3 aggregation groups?
I hope someone can help because it's really confusing...
Thanks in advice
Guilherme
