4500 trunking mode not working.. help..

[ddicky]

Hey,

  I'm newbie to 3com switch and are setting up a simple network in our office.Basically I need 2 vlan to be able to talk to each other  on all the 26 ports &  I set the trunking mode on the all the 26 ports.It means at anytime I need to connect to any of the 26 ports , as long as my client devices are configured correctly with the IP range below and gateway I should able to ping or talk to to each other. But I have no luck doing that work. 

vlan 1 192.168.1.0/24 , vlan IP 192.168.1.1/24

vlan 2 192.168.2.0/24 vlan ip 192.168.2.1/24

I just downloaded latest version from 3com website and load into the switch

Any advise or command are highly appreciated.