802.1x activation on HP comware switch with clearpass

[Chris28]

Hello,
I introduce myself Chris,

I would like to set up the 802.1x on an HP Comware switch to Radius server. Do you have a tutorial on the types of commands? Thank you for your reply ...

[jmpk · Accepted solution]

Hello Chirs, 

From your request , i could under that you are setting up  802.1x on HPE comware device. Please find the below security configuation guide for COM 7  and also please let me know which HPE model you are going to use.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04566748&docLocale=en_US

Thank You!
I am an HPE Employee

[Chris28]

Hello JMPK,

Thank you the equiments are type 5130

[Chris28]

Hello again,

it's different for 5130 ? or ...

Best regard

[jmpk]

Hello Chris ,

Can you please refer to the below link for 5130 switch , and it wont be much difference since both are in Comware 7

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00007093en_us-1.pdf

Thanks

[Chris28]

Thanks

[Chris28]

Hello JMPK,
Following your configuration documentation

I have trouble getting the complete list of commands to activate the 802.1x to clearpass.
This is for an installation project on HP 5130 switch already in production
  Do you have the correct order of commands to implement in the console, please?

Best regard

Chris