8800 48-Port Module Issues

[EthernetNinja]

Hi All,



I recently purchased two new 48-Port modules for my existing 8800 switch. Neither of these modules seems to be detected by the switch and passes no traffic. To test, I took a working 48-Port module from another site and that module worked fine. The weird part is that when I took these new modules to the 2nd site, they are work fine at that location.





I know it sounds crazy but has anyone seen this behavior before?



:quest:



Hiyah!

This message was edited by EthernetNinja on 1-28-09 @ 1:04 PM

[sugar_1]

What is the part number of the module and what version of code is your 8800 runnning?



You may need newer code for the module to be recognized....

[EthernetNinja]

Hey Sugar,



I have the following:

Site A:

8800 3C17540

360Gps Fabric 3C17508, running 3.01.22

2x48-Port 10/100/1000 3C17531





Site B:

8800 3C17540

360Gps Fabric 3C17508, running 3.01.31

2x48-Port 10/100/1000 3C17531



The two new 48 port 10/100/1000 modules are part

number 3C17528A.



I upgraded the 'Site A' fabric and the module came

right up. I guess I should have read the

documentation.



Doh, *Face-Palm* slap!









Hiyah!

This message was edited by EthernetNinja on 1-28-09 @ 1:48 PM

[Knapovsky]

Revision A Modules is newer than code 3.1.22 , therefore it didn't work...

./mk

[Shirin]

You shall use 3.01.31 which adds support for the modules 3C17528